Introduction

Apple devices have a build-in feature named "Activation Lock", a part of the feature called "Find my iPhone" available on iPhone / iPad / iPod.

Activation Lock is a countermeasure made to prevent theft of Apple devices. The Activation Lock feature (if enabled) requires that the user who enabled Activation Lock on the device enters the Apple ID after an iOS device has been wiped.

If a user/thief is unable to enter the correct Apple ID, then the device can't be activated and is useless.

Requirements

In order to retrieve an Activation Lock bypass code, the following must be fulfilled:

Device must be Supervised
Device must be enrolled into CapaInstaller
User may not yet have enabled Activation Lock (Find my iPhone), if it is already enabled they can disable it again and await the next HW inventory and then re-enable it

Can I see if a device is Activation Locked?

Click here to expand

Apple has discontinued the activation lock check home page and there is no easy way to check if an iOS device is Activation Locked.

There is another way to check it from Apple Support. Visit Apple's Support and from their support website try and send a device for repair. To do this select iPhone. Click on a search category related to hardware, for example, Battery, Power & Charging or Repairs & Physical Damage, then select a specific problem like Buttons not working.

On the next page, you should see an option to Send in for Repair. If the item is not listed, go back and select a different device problem from the previous screen. Clicking through Send in for Repair will retrieve a page that allows users to Enter your serial number, IMEI, or MEID.

Enter the IMEI of a target device to check its Activation Lock status.

Bypassing the Activation Lock

Click here to expand

Apple has made it possible for MDM solutions to retrieve an Activation Lock Bypass Code for enrolled devices. But in order to retrieve a bypass code, the device needs to be Supervised. CapaInstaller will automatically retrieve a bypass code if the device is enrolled, Supervised and if Activation Lock isn't already applied by the user.

There are 3 ways of bypassing the Activation Lock

If you know the device passcode. Only from iOS 11 and you know the device passcode!
By entering the Activation Lock Bypass Code on the device
Send Activation Lock Bypass Code from Ci Console

Where Can I Get An Activation Lock Bypass Code?

Click here to expand

The Activation Lock bypass code is read from the Device and stored as part of the Hardware Inventory. The hardware inventory value is called "Activation Lock Bypass Code" and if a code is present it is of the form "XXXXX-XXXXX-XXXX-XXXX-XXXX-XXXX".

Every time a device is activated the Activation Lock Bypass Code is changed.

How to use the Activation Lock Bypass Code on a Device

Click here to expand

When the device is Wiped either remote or by entering the wrong passcode, then the device will start as new. But during the normal setup, the device will show the following screen

In order to use the device, the user with correct Apple ID needs to enter the credentials (the initial letters for the Apple ID is listed in the parenthesis).

If the correct Apple ID isn't available the "Activation Lock Bypass Code" which was retrieved BEFORE the device was wiped can be used instead of the Apple ID.

The "Activation Lock Bypass Code" must be entered into the Password field (leave the Apple ID field empty). Please be aware that the code must be entered with Dashes and capital letters EXACTLY as it can be seen from the Inventory. In the following example the "Activation Lock Bypass Code" is the following string "92Q80-RJ15M-GHNY-GT0A-4U68-64V4"

If the Activation Lock Bypass Code is correct then the device will be unlocked and can be assigned a new user.

How to Bypass Activation Lock from CapaInstaller Console

Click here to expand

In the CapaInstaller Console, you can send a command to Apple that the device to bypass the Activation Lock

From Configuration Management→ Point → Units - Computers and Devices → iOS device

Right-click on the device and select Send Command → Activation Lock Bypass.

Check the Changelog on the device and wait for the command to successfully execute.

If you are on the Activation Lock Screen on the device, select go back and wait for a few seconds. Then the device setup should continue without the Activation Lock and a new Apple ID can be used.

How to Bypass Activation Lock Device with Passcode

Click here to expand

Requirements

Must be iOS 11 or newer device
Must know the correct passcode

On the device click on Unlock with a passcode and enter the passcode

Read more

Can I see if a device is Activation Locked?

Bypassing the Activation Lock

Where Can I Get An Activation Lock Bypass Code?

How to use the Activation Lock Bypass Code on a Device

How to Bypass Activation Lock from CapaInstaller Console

How to Bypass Activation Lock Device with Passcode