/
Configuring the Front-end Service

Configuring the Front-end Service

Nov 14, 2023

Introduction

This will guide you through the deployment of a Front-end Service


StepAction
1

Enter the internal port, the default port is 5021. This is the internal port on the server that the service is listening on.

Assign a public URL to the service if needed. This is the public URL that the agents connect to on the outside of the firewall.

You can also configure a secondary port for internal and public use. If the primary port is not available, the secondary port is used

2

Select the default Management Point for new agents.

3

Change these Log settings as needed or use the default