- Created by Youssef Benarab, last modified on Nov 29, 2019
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 3 Next »
Multicast is when someone sends a single set of data packets across a network to multiple selected users at the same time. Multicast is subscription-based: Computers that want to receive multicast traffic use ICMP messages to let routers know which multicast addresses they want to subscribe to. The routers are then able to calculate which multicast messages they need to send to receivers on their different interfaces. A packet is considered a multicast packet if the destination IP address is in the range 224.0.0.0 to 239.255.255.255.
The Multicast time view graph (ANALYZE > Graphs > Time View > Multicast Traffic) lets you view the number of sent and received UDP packets and bytes on multicast IP addresses.
You can view such numbers measured on either the sender or on the receivers of the multicast traffic.
View Multicast Traffic Measured on Sender
Use this view if you want to know about multicast traffic measured on a computer that sends multicast traffic.
In the example illustration (click thumbnail to view image in full size) sent multicast traffic is measured on the computer with the green dot:
- Make sure that Measured on Sender is selected.
- Select required multicast sender. You can only select a single sender per graph.
If you want to limit your results to a particular type of multicast traffic, select required multicast group. Otherwise select All Multicast.
What's a multicast group?Multicast groups help you filter your data if you are only interested in a particular type of multicast traffic. PerformanceGuard comes with preconfigured groups for common types of multicast traffic, LLMNR and SSDP, and PerformanceGuard administrators can set up additional groups. See also Manage Multicast Groups.
- In the Type menu, select what you want to view on the graph: Number of sent packets per minute or second, or number of sent bytes per minute or second.
- In the Interval menu, select the period of time that the graph should cover. If the predefined intervals don't suit you, select Custom to specify your own interval.
- Click the Update button.
View Multicast Traffic Measured on Receivers
Use this view if you want to know about multicast traffic measured on selected computers that receive multicast traffic.
In the example illustration (click thumbnail to view image in full size) received multicast traffic is measured on the computers with the green dots:
- Select Measured on Receiver.
- Select required multicast receivers. The receivers are grouped into locations and/or groups based on which network they belong to. If you want to know about multicast traffic received on any computer, select All agents.
- If required, you can use the Multicast Servers menu to limit your results by selecting a specific multicast server from which the received traffic must have been sent. The server that sent the multicast traffic doesn't have to be a server on your own network, it can also be an external one. If you want to know about multicast traffic received from any server, select All servers.
I can't select the multicast server that I want. What's wrong? Only monitored multicast servers are listed. See Server Lists for details about monitored servers.
- If you want to limit your results to a particular type of multicast traffic, select required multicast group. Otherwise select All Multicast.
What's a multicast group? Multicast groups help you filter your multicast data if you are only interested in a particular type of multicast traffic. PerformanceGuard comes with preconfigured groups for common types of multicast traffic, LLMNR and SSDP, and your PerformanceGuard administrator may have set up additional groups. See also Manage Multicast Groups.
- In the Type menu, select what you want to view on the graph: The number of received packets per minute or second, or the number of received bytes per minute or second.
- In the Interval menu, select the period of time that the graph should cover. If the predefined intervals don't suit you, select Custom to specify your own interval.
- Click the Update button.
Why can't I view response times for multicast traffic? Multicast messages are unacknowledged (that is receivers don't confirm that they have received the messages). Therefore, you can't be sure of exactly when the messages were received, and therefore PerformanceGuard doesn't monitor multicast response times or multicast network transmission times.
You can also view multicast activity in a table format by selecting ANALYZE > Overview > IP Traffic > Multicast Activity. See Multicast Activity Overview.
Search this documentation
On this page
In this section
- No labels